ファイル名e1000_82541.c
ソースファイル情報| 内容 | 行数 | 比率 | 
|---|---|---|
| コメント行数 | 268 | 20% | 
| 空行行数 | 265 | 20% | 
| 実行行数 | 781 | 60% | 
| 合計行数 | 1314 | 100% | 
関数定義数| 内容 | 定義数 | 
|---|---|
| 関数数 | 18 | 
定義関数| No. | 型 | 名称 | 属性 | 説明 | 
|---|---|---|---|---|
1  | 
e1000_init_phy_params_82541 | static s32 | e1000_init_phy_params_82541 - Init PHY func ptrs. | |
2  | 
e1000_init_nvm_params_82541 | static s32 | e1000_init_nvm_params_82541 - Init NVM func ptrs. | |
3  | 
e1000_init_mac_params_82541 | static s32 | e1000_init_mac_params_82541 - Init MAC func ptrs. | |
4  | 
e1000_init_function_pointers_82541 | void | e1000_init_function_pointers_82541 - Init func ptrs. | |
5  | 
e1000_reset_hw_82541 | static s32 | e1000_reset_hw_82541 - Reset hardware | |
6  | 
e1000_init_hw_82541 | static s32 | e1000_init_hw_82541 - Initialize hardware | |
7  | 
e1000_get_link_up_info_82541 | static s32 | e1000_get_link_up_info_82541 - Report speed and duplex | |
8  | 
e1000_phy_hw_reset_82541 | static s32 | e1000_phy_hw_reset_82541 - PHY hardware reset | |
9  | 
e1000_setup_copper_link_82541 | static s32 | e1000_setup_copper_link_82541 - Configure copper link settings | |
10  | 
e1000_check_for_link_82541 | static s32 | e1000_check_for_link_82541 - Check/Store link connection | |
11  | 
e1000_config_dsp_after_link_change_82541 | static s32 | e1000_config_dsp_after_link_change_82541 - Config DSP after link | |
12  | 
e1000_get_cable_length_igp_82541 | static s32 | e1000_get_cable_length_igp_82541 - Determine cable length for igp PHY | |
13  | 
e1000_set_d3_lplu_state_82541 | static s32 | e1000_set_d3_lplu_state_82541 - Sets low power link up state for D3 | |
14  | 
e1000_setup_led_82541 | static s32 | e1000_setup_led_82541 - Configures SW controllable LED | |
15  | 
e1000_cleanup_led_82541 | static s32 | e1000_cleanup_led_82541 - Set LED config to default operation | |
16  | 
e1000_phy_init_script_82541 | static s32 | e1000_phy_init_script_82541 - Initialize GbE PHY | |
17  | 
e1000_power_down_phy_copper_82541 | static void | e1000_power_down_phy_copper_82541 - Remove link in case of PHY power down | |
18  | 
e1000_clear_hw_cntrs_82541 | static void | e1000_clear_hw_cntrs_82541 - Clear device specific hardware counters | 
目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー