e1000_82543.c

e1000_82543.c

定義関数

Function	Static	Inline	Class	Template

No.	型	名称	属性	説明
1	Static	e1000_init_phy_params_82543	static s32	e1000_init_phy_params_82543 - Init PHY func ptrs.
2	Static	e1000_init_nvm_params_82543	static s32	e1000_init_nvm_params_82543 - Init NVM func ptrs.
3	Static	e1000_init_mac_params_82543	static s32	e1000_init_mac_params_82543 - Init MAC func ptrs.
4	Function	e1000_init_function_pointers_82543	void	e1000_init_function_pointers_82543 - Init func ptrs.
5	Static	e1000_tbi_compatibility_enabled_82543	static bool	e1000_tbi_compatibility_enabled_82543 - Returns TBI compat status
6	Static	e1000_set_tbi_compatibility_82543	static void	e1000_set_tbi_compatibility_82543 - Set TBI compatibility
7	Function	e1000_tbi_sbp_enabled_82543	bool	e1000_tbi_sbp_enabled_82543 - Returns TBI SBP status
8	Static	e1000_set_tbi_sbp_82543	static void	e1000_set_tbi_sbp_82543 - Set TBI SBP
9	Static	e1000_init_phy_disabled_82543	static bool	e1000_init_phy_disabled_82543 - Returns init PHY status
10	Function	e1000_tbi_adjust_stats_82543	void	e1000_tbi_adjust_stats_82543 - Adjust stats when TBI enabled
11	Static	e1000_read_phy_reg_82543	static s32	e1000_read_phy_reg_82543 - Read PHY register
12	Static	e1000_write_phy_reg_82543	static s32	e1000_write_phy_reg_82543 - Write PHY register
13	Static	e1000_raise_mdi_clk_82543	static void	e1000_raise_mdi_clk_82543 - Raise Management Data Input clock
14	Static	e1000_lower_mdi_clk_82543	static void	e1000_lower_mdi_clk_82543 - Lower Management Data Input clock
15	Static	e1000_shift_out_mdi_bits_82543	static void	e1000_shift_out_mdi_bits_82543 - Shift data bits our to the PHY
16	Static	e1000_shift_in_mdi_bits_82543	static u16	e1000_shift_in_mdi_bits_82543 - Shift data bits in from the PHY
17	Static	e1000_phy_force_speed_duplex_82543	static s32	e1000_phy_force_speed_duplex_82543 - Force speed/duplex for PHY
18	Static	e1000_polarity_reversal_workaround_82543	static s32	e1000_polarity_reversal_workaround_82543 - Workaround polarity reversal
19	Static	e1000_phy_hw_reset_82543	static s32	e1000_phy_hw_reset_82543 - PHY hardware reset
20	Static	e1000_reset_hw_82543	static s32	e1000_reset_hw_82543 - Reset hardware
21	Static	e1000_init_hw_82543	static s32	e1000_init_hw_82543 - Initialize hardware
22	Static	e1000_setup_link_82543	static s32	e1000_setup_link_82543 - Setup flow control and link settings
23	Static	e1000_setup_copper_link_82543	static s32	e1000_setup_copper_link_82543 - Configure copper link settings
24	Static	e1000_setup_fiber_link_82543	static s32	e1000_setup_fiber_link_82543 - Setup link for fiber
25	Static	e1000_check_for_copper_link_82543	static s32	e1000_check_for_copper_link_82543 - Check for link (Copper)
26	Static	e1000_check_for_fiber_link_82543	static s32	e1000_check_for_fiber_link_82543 - Check for link (Fiber)
27	Static	e1000_config_mac_to_phy_82543	static s32	e1000_config_mac_to_phy_82543 - Configure MAC to PHY settings
28	Static	e1000_write_vfta_82543	static void	e1000_write_vfta_82543 - Write value to VLAN filter table
29	Static	e1000_mta_set_82543	static void	e1000_mta_set_82543 - Set multicast filter table address
30	Static	e1000_led_on_82543	static s32	e1000_led_on_82543 - Turn on SW controllable LED
31	Static	e1000_led_off_82543	static s32	e1000_led_off_82543 - Turn off SW controllable LED
32	Static	e1000_clear_hw_cntrs_82543	static void	e1000_clear_hw_cntrs_82543 - Clear device specific hardware counters

See Also

目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー