e1000e_phy.c
内容 | 行数 | 比率 |
---|---|---|
コメント行数 | 885 | 27% |
空行行数 | 588 | 18% |
実行行数 | 1850 | 55% |
合計行数 | 3323 | 100% |
内容 | 定義数 |
---|---|
関数数 | 68 |
No. | 型 | 名称 | 属性 | 説明 |
---|---|---|---|---|
1 |
Function | e1000e_check_reset_block_generic | s32 | e1000e_check_reset_block_generic - Check if PHY reset is blocked |
2 |
Function | e1000e_get_phy_id | s32 | e1000e_get_phy_id - Retrieve the PHY ID and revision |
3 |
Function | e1000e_phy_reset_dsp | s32 | e1000e_phy_reset_dsp - Reset PHY DSP |
4 |
Function | e1000e_read_phy_reg_mdic | s32 | e1000e_read_phy_reg_mdic - Read MDI control register |
5 |
Function | e1000e_write_phy_reg_mdic | s32 | e1000e_write_phy_reg_mdic - Write MDI control register |
6 |
Function | e1000e_read_phy_reg_m88 | s32 | e1000e_read_phy_reg_m88 - Read m88 PHY register |
7 |
Function | e1000e_write_phy_reg_m88 | s32 | e1000e_write_phy_reg_m88 - Write m88 PHY register |
8 |
Static | __e1000e_read_phy_reg_igp | static s32 | __e1000e_read_phy_reg_igp - Read igp PHY register |
9 |
Function | e1000e_read_phy_reg_igp | s32 | e1000e_read_phy_reg_igp - Read igp PHY register |
10 |
Function | e1000e_read_phy_reg_igp_locked | s32 | e1000e_read_phy_reg_igp_locked - Read igp PHY register |
11 |
Static | __e1000e_write_phy_reg_igp | static s32 | e1000e_write_phy_reg_igp - Write igp PHY register |
12 |
Function | e1000e_write_phy_reg_igp | s32 | e1000e_write_phy_reg_igp - Write igp PHY register |
13 |
Function | e1000e_write_phy_reg_igp_locked | s32 | e1000e_write_phy_reg_igp_locked - Write igp PHY register |
14 |
Static | __e1000e_read_kmrn_reg | static s32 | __e1000e_read_kmrn_reg - Read kumeran register |
15 |
Function | e1000e_read_kmrn_reg | s32 | e1000e_read_kmrn_reg - Read kumeran register |
16 |
Function | e1000e_read_kmrn_reg_locked | s32 | e1000e_read_kmrn_reg_locked - Read kumeran register |
17 |
Static | __e1000e_write_kmrn_reg | static s32 | __e1000e_write_kmrn_reg - Write kumeran register |
18 |
Function | e1000e_write_kmrn_reg | s32 | e1000e_write_kmrn_reg - Write kumeran register |
19 |
Function | e1000e_write_kmrn_reg_locked | s32 | e1000e_write_kmrn_reg_locked - Write kumeran register |
20 |
Function | e1000e_copper_link_setup_82577 | s32 | e1000e_copper_link_setup_82577 - Setup 82577 PHY for copper link |
21 |
Function | e1000e_copper_link_setup_m88 | s32 | e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link |
22 |
Function | e1000e_copper_link_setup_igp | s32 | e1000e_copper_link_setup_igp - Setup igp PHY's for copper link |
23 |
Static | e1000e_copper_link_autoneg | static s32 | e1000e_copper_link_autoneg - Setup/Enable autoneg for copper link |
24 |
Static | e1000e_phy_setup_autoneg | static s32 | e1000e_phy_setup_autoneg - Configure PHY for auto-negotiation |
25 |
Function | e1000e_setup_copper_link | s32 | e1000e_setup_copper_link - Configure copper link settings |
26 |
Function | e1000e_phy_force_speed_duplex_igp | s32 | e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY |
27 |
Function | e1000e_phy_force_speed_duplex_m88 | s32 | e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY |
28 |
Function | e1000e_phy_force_speed_duplex_ife | s32 | e1000e_phy_force_speed_duplex_ife - Force PHY speed & duplex |
29 |
Function | e1000e_phy_force_speed_duplex_setup | void | e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex |
30 |
Function | e1000e_set_d3_lplu_state | s32 | e1000e_set_d3_lplu_state - Sets low power link up state for D3 |
31 |
Function | e1000e_check_downshift | s32 | e1000e_check_downshift - Checks whether a downshift in speed occurred |
32 |
Function | e1000e_check_polarity_m88 | s32 | e1000e_check_polarity_m88 - Checks the polarity. |
33 |
Function | e1000e_check_polarity_igp | s32 | e1000e_check_polarity_igp - Checks the polarity. |
34 |
Function | e1000e_check_polarity_ife | s32 | e1000e_check_polarity_ife - Check cable polarity for IFE PHY |
35 |
Function | e1000e_wait_autoneg | s32 | e1000e_wait_autoneg - Wait for auto-neg completion |
36 |
Function | e1000e_phy_has_link_generic | s32 | e1000e_phy_has_link_generic - Polls PHY for link |
37 |
Function | e1000e_get_cable_length_m88 | s32 | e1000e_get_cable_length_m88 - Determine cable length for m88 PHY |
38 |
Function | e1000e_get_cable_length_igp_2 | s32 | e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY |
39 |
Function | e1000e_get_phy_info_m88 | s32 | e1000e_get_phy_info_m88 - Retrieve PHY information |
40 |
Function | e1000e_get_phy_info_igp | s32 | e1000e_get_phy_info_igp - Retrieve igp PHY information |
41 |
Function | e1000e_phy_sw_reset | s32 | e1000e_phy_sw_reset - PHY software reset |
42 |
Function | e1000e_phy_hw_reset_generic | s32 | e1000e_phy_hw_reset_generic - PHY hardware reset |
43 |
Function | e1000e_get_cfg_done | s32 | e1000e_get_cfg_done - Generic configuration done |
44 |
Function | e1000e_phy_init_script_igp3 | s32 | e1000e_phy_init_script_igp3 - Inits the IGP3 PHY |
45 |
Function | e1000e_get_phy_type_from_id | enum e1000_phy_type | e1000e_get_phy_type_from_id - Get PHY type from id |
46 |
Function | e1000e_determine_phy_address | s32 | e1000e_determine_phy_address - Determines PHY address. |
47 |
Static | e1000e_get_phy_addr_for_bm_page | static u32 | e1000e_get_phy_addr_for_bm_page - Retrieve PHY page address |
48 |
Function | e1000e_write_phy_reg_bm | s32 | e1000e_write_phy_reg_bm - Write BM PHY register |
49 |
Function | e1000e_read_phy_reg_bm | s32 | e1000e_read_phy_reg_bm - Read BM PHY register |
50 |
Function | e1000e_read_phy_reg_bm2 | s32 | e1000e_read_phy_reg_bm2 - Read BM PHY register |
51 |
Function | e1000e_write_phy_reg_bm2 | s32 | e1000e_write_phy_reg_bm2 - Write BM PHY register |
52 |
Static | e1000e_access_phy_wakeup_reg_bm | static s32 | e1000e_access_phy_wakeup_reg_bm - Read BM PHY wakeup register |
53 |
Function | e1000e_power_up_phy_copper | void | e1000e_power_up_phy_copper - Restore copper link in case of PHY power down |
54 |
Function | e1000e_power_down_phy_copper | void | e1000e_power_down_phy_copper - Restore copper link in case of PHY power down |
55 |
Function | e1000e_set_mdio_slow_mode_hv | s32 | e1000e_set_mdio_slow_mode_hv - Set slow MDIO access mode |
56 |
Static | __e1000e_read_phy_reg_hv | static s32 | __e1000e_read_phy_reg_hv - Read HV PHY register |
57 |
Function | e1000e_read_phy_reg_hv | s32 | e1000e_read_phy_reg_hv - Read HV PHY register |
58 |
Function | e1000e_read_phy_reg_hv_locked | s32 | e1000e_read_phy_reg_hv_locked - Read HV PHY register |
59 |
Static | __e1000e_write_phy_reg_hv | static s32 | __e1000e_write_phy_reg_hv - Write HV PHY register |
60 |
Function | e1000e_write_phy_reg_hv | s32 | e1000e_write_phy_reg_hv - Write HV PHY register |
61 |
Function | e1000e_write_phy_reg_hv_locked | s32 | e1000e_write_phy_reg_hv_locked - Write HV PHY register |
62 |
Static | e1000e_get_phy_addr_for_hv_page | static u32 | e1000e_get_phy_addr_for_hv_page - Get PHY adrress based on page |
63 |
Static | e1000e_access_phy_debug_regs_hv | static s32 | e1000e_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers |
64 |
Function | e1000e_link_stall_workaround_hv | s32 | e1000e_link_stall_workaround_hv - Si workaround |
65 |
Function | e1000e_check_polarity_82577 | s32 | e1000e_check_polarity_82577 - Checks the polarity. |
66 |
Function | e1000e_phy_force_speed_duplex_82577 | s32 | e1000e_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY |
67 |
Function | e1000e_get_phy_info_82577 | s32 | e1000e_get_phy_info_82577 - Retrieve I82577 PHY information |
68 |
Function | e1000e_get_cable_length_82577 | s32 | e1000e_get_cable_length_82577 - Determine cable length for 82577 PHY |
目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー