igb_82575.c

igb_82575.c

定義関数

Function	Static	Inline	Class	Template

No.	型	名称	属性	説明
1	Static	igb_init_phy_params_82575	static s32	igb_init_phy_params_82575 - Init PHY func ptrs.
2	Static	igb_init_nvm_params_82575	static s32	igb_init_nvm_params_82575 - Init NVM func ptrs.
3	Static	igb_init_mac_params_82575	static s32	igb_init_mac_params_82575 - Init MAC func ptrs.
4	Function	igb_init_function_pointers_82575	void	igb_init_function_pointers_82575 - Init func ptrs.
5	Static	igb_acquire_phy_82575	static s32	igb_acquire_phy_82575 - Acquire rights to access PHY
6	Static	igb_release_phy_82575	static void	igb_release_phy_82575 - Release rights to access PHY
7	Static	igb_read_phy_reg_sgmii_82575	static s32	igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
8	Static	igb_write_phy_reg_sgmii_82575	static s32	igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
9	Static	igb_get_phy_id_82575	static s32	igb_get_phy_id_82575 - Retrieve PHY addr and id
10	Static	igb_phy_hw_reset_sgmii_82575	static s32	igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
11	Static	igb_set_d0_lplu_state_82575	static s32	igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
12	Static	igb_acquire_nvm_82575	static s32	igb_acquire_nvm_82575 - Request for access to EEPROM
13	Static	igb_release_nvm_82575	static void	igb_release_nvm_82575 - Release exclusive access to EEPROM
14	Static	igb_acquire_swfw_sync_82575	static s32	igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
15	Static	igb_release_swfw_sync_82575	static void	igb_release_swfw_sync_82575 - Release SW/FW semaphore
16	Static	igb_get_cfg_done_82575	static s32	igb_get_cfg_done_82575 - Read config done bit
17	Static	igb_get_link_up_info_82575	static s32	igb_get_link_up_info_82575 - Get link speed/duplex info
18	Static	igb_check_for_link_82575	static s32	igb_check_for_link_82575 - Check for link
19	Static	igb_get_pcs_speed_and_duplex_82575	static s32	igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
20	Function	igb_shutdown_serdes_link_82575	void	igb_shutdown_serdes_link_82575 - Remove link during power down
21	Static	igb_reset_hw_82575	static s32	igb_reset_hw_82575 - Reset hardware
22	Static	igb_init_hw_82575	static s32	igb_init_hw_82575 - Initialize hardware
23	Static	igb_setup_copper_link_82575	static s32	igb_setup_copper_link_82575 - Configure copper link settings
24	Static	igb_setup_serdes_link_82575	static s32	igb_setup_serdes_link_82575 - Setup link for serdes
25	Static	igb_valid_led_default_82575	static s32	igb_valid_led_default_82575 - Verify a valid default LED config
26	Static	igb_sgmii_active_82575	static bool	igb_sgmii_active_82575 - Return sgmii state
27	Static	igb_reset_init_script_82575	static s32	igb_reset_init_script_82575 - Inits HW defaults after reset
28	Static	igb_read_mac_addr_82575	static s32	igb_read_mac_addr_82575 - Read device MAC address
29	Static	igb_power_down_phy_copper_82575	static void	igb_power_down_phy_copper_82575 - Remove link during PHY power down
30	Static	igb_clear_hw_cntrs_82575	static void	igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
31	Function	igb_rx_fifo_flush_82575	void	igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
32	Static	igb_set_pcie_completion_timeout	static s32	igb_set_pcie_completion_timeout - set pci-e completion timeout
33	Function	igb_vmdq_set_loopback_pf	void	igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
34	Function	igb_vmdq_set_replication_pf	void	igb_vmdq_set_replication_pf - enable or disable vmdq replication

See Also

目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー